Sulphur Preparations

Allover the world sulphur is commonly used as the classical vulcansiation agent within the rubber industry. Therefore the Schill+Seilacher "Struktol" GmbH offers a range of different sulphur specialities for those common uses. The Struktol® Portofolio contains sulphur preparations based on soluble and insoluble sulphur that garuantee an easier and more efficient dispersion compared to classical sulphur in powder form. 

Soluble Sulphur
“Flowers of Sulphur” was the initial commercially available soluble sulphur product, which is no longer used in the manufacturing of rubber goods, as the acidic character from the sulphur dioxide formed by sublimation in production had ecologically undesirable side-effects. Strongly regulated now, low values of H2SO4 are specified for any sulphur used within the rubber industry.
Years of innovation have now lead to the development of sulphur that is purer and better prepared for its role in rubber processing. Struktol soluble sulphur products (all available types see below) compromise fine particles of ground sulphur together with dispersing additives that are safe and effective in use.

Struktol® SU 95
  • Preparation of soluble sulphur
  • Yellow, non-dusting powder

Soluble sulphur: 95 %
Dispersing agent: 5%
Packaging: 20 kg bags
Density: 1900 kg/m³
Dosage factor: 1

  • Highest sulphur content with good dispersion
  • Reduces sulphur dust formation
Struktol® SU 105
  • Preparation of soluble sulphur
  • Yellow paste

Soluble sulphur: 50 %
Dispersing agent: 50 %
Packaging: 20 kg bags
Density: 1600 kg/m³
Dosage Relation: 2

  • Maximises sulphur dispersion in very soft compounds or in low shear mixing
  • Reduces mixing time
  • Suitable for use on open mill or internal mixer
Struktol® SU 120
  • Preparation of soluble sulphur
  • Yellow, non-dusting powder

Soluble sulphur: 83 %
Dispersing agent: 17 %
Packaging: 20 kg bags
Density: 1650 kg/m³
Dosage Relation: 1.2

  • Optimised sulphur dispersion with high activity
  • A high performance alternative to polymer bound sulphur products, where increased dispersibility is required
Struktol® SU 75 L
  • Preparation of soluble sulphur
  • Yellow, non-dusting powder

Soluble sulphur: 95 %
Dispersing agent: 5 %
Packaging: 20 kg bags
Density: 1650 kg/m³
Dosage Relation: 1.33

  • Sulphur dispersion suitable for use in food related applications
Struktol® SU 95 L
  • Preparation of soluble sulphur
  • Yellow, non-dusting powder

Soluble sulphur: 75 %
Dispersing agent: 25 %
Packaging: 20 kg bags
Density: 1900 kg/m³
Dosage Relation: 1

  • Sulphur dispersion suitable for use in food related applications
Struktol® SU 120 L
  • Preparation of soluble sulphur
  • Yellow, non-dusting powder

Soluble sulphur: 83 %
Dispersing agent: 17 %
Packaging: 20 kg bags
Density: 1650 kg/m³
Dosage Relation: 1.2

  • Sulphur dispersion suitable for use in food related applications

Insoluble Sulphur
Insoluble sulphur is primarily used in the rubber industry. Its advantage over ground natural sulphur is that it does not cause bloom, and that it does not dissolve and migrate in rubber. The S8 ring molecules present in soluble sulphur at room temperature open at temperatures above 158 °C, allowing chains of sulphur to combine with one another to form polymeric sulphur. Insoluble sulphur is produced by quenching the polymeric melt at low temperatures, preventing the reversion into S8 rings, leaving the polymer structure meta-stable at room temperature.

Polymeric sulphur is insoluble in organic solvents and elastomers. In a rubber compound it is suspended, similar to inert filler, though exhibiting thermoplastic behaviour, softening to a degree at processing temperature. Most insoluble sulphurs commercially available contains over 90 % polymeric sulphur and less than 10 % soluble sulphur. These products often have very fine particles that tend to agglomerate under the influence of a static charge, which are in turn difficult to disperse in rubber. That insoluble sulphur is more likely to become electrically charged than soluble sulphur is well illustrated when insoluble sulphur is added to a gum stock on a two roll mill and sulphur particles shoot up above the nip.

For this reason, maintaining a fine particle size is imperative for a uniform distribution of polymeric sulphur as an insoluble compounding material, though this makes it more difficult to achieve excellent dispersion in rubber. These very problems, i.e. the build-up of static charge, dispersion difficulties and explosion risks (since polymeric sulphur is an extremely dusty material) have lead to our development of preparations that address these concerns and that work in concert with very high efficiency dispersing agents.

It is often possible to work with a mixture of soluble and insoluble sulphur in order to take advantage of the limited solubility of sulphur in a rubber compound. For example, Struktol SU 135 is a 1:1 combination of both modifications and offers the industry’s best compromise between bloom, dispersability and cost for the use in technical rubber articles.

The following Struktol products are sulphur preparations based on insoluble sulphur:

Struktol® SU 50
  • Preparation of insoluble sulphur
  • Yellow, non-dusting powder

Total sulphur: 50 % (insoluble sulphur 48.5 %)
Dispersing agent: 50 %
Packaging: 20 kg bags
Density: 1700 kg/m³
Dosage Relation: 2

  • High performance and optimal insoluble sulphur dispersion
  • Designed for use in applications where dispersion is critical
Struktol® SU 109
  • Preparation of insoluble sulphur
  • Yellow, non-dusting powder

Total sulphur: 75 % (insoluble sulphur 73.5 %)
Dispersing agent: 25 %
Packaging: 20 kg bags
Density: 1500 kg/m³
Dosage Relation: 1.33

  • Suitable for use as a high perfomance replacement of polymer bound or oiltreated insoluble sulphur products, where increased dispersibility is required
Struktol® SU 135
  • Preparation of insoluble sulphur
  • Yellow, non-dusting powder

Total sulphur: 75 % (insoluble sulphur 37.5 %)
Dispersing agent: 25 %
Packaging: 20 kg bags
Density: 1500 kg/m³
Dosage Relation: 1.33

  • Optimised ratio between insoluble and soluble sulphur
  • Produced as a blended dispersion product, offering significant improvement when compared to traditional oil treated dispersions
  • Suitable for compounds where the exclusive use of insoluble sulphur is not required